Thermotec Inverter Heat Pump Drip Tray Heater Kit
The kit contains a 70w heater wire which automatically turns on in cold weather when the air temperature falls below around +3c
The heater wire melts any ice which can form in the bottom of the heat pump to keep the drain holes unblocked and to prevent a build up of ice. It can be fitted to virtually any heat pump make or model.
The kit contains a 70w heater wire which automatically turns on in cold weather when the air temperature falls below around +3c
The heater wire melts any ice which can form in the bottom of the heat pump to keep the drain holes unblocked and to prevent a build up of ice. It can be fitted to virtually any heat pump make or model.
These kits are supplied by Thermotec for use on our pond heat pumps, but can be used in virtually any heat pump make or model
This kit contains a low power electric heater element that sits in the bottom of the heat pump under the evaporator, the bit with the fins. It can be required when the heat pumps are going to be operated at very cold temperatures – below 0c, for example on koi ponds, or for indoor pools.
This kit includes all parts necessary to install the kit so that any ice that forms in the drip tray of the heat pump is melted into water.
The kit includes:
- 70w heater element (running current is only 0.29A)
- Temperature controlled switch – turns the heater wire on when the air temp falls below around +3c
- All necessary wires
- Installation instructions
The temperature controlled switch automatically turns the heating element on in very cold weather and turns it off again when the temperature rises to provide a fully automatic system. The heating element is powered from within the heat pump and therefore does not require a separate power supply.
Please see the installation manual for more information.
Standard Delivery Monday to Friday, via DPD or APC
You will receive from our courier tracking details once your item has been despatched, please ensure you check your email / mobile number to monitor your parcel in transit.
Delivery costs for standard items in the UK - £5.95
(Surcharges do apply to remote postcodes)
Heavy items - £9.95
Pipe - £14.95
Larger items:
Palletised items - Some large oversize products, typically items weighing more than 30kg, may require delivery via pallet. Standard Pallet charge is approx. £50.00. To ensure there are no delays with delivery, please include a contact number when placing the order.
Overseas – DHL and UPS, cost based on weight / volume at checkout.
Damages
Although we check that items we send are in good condition before despatched and are packed well to prevent damage, it is sometimes inevitable that the occasional item will get broken in transit.
Should this happen, please let us know within 24 hours of receiving your parcel. We will ask you to email us providing some images of the damage so we can address this with the courier.
We will arrange for a replacement to be sent out to you as quickly as possible, free of charge.
Below is a list of documents that you may find useful.
Can’t find what you’re looking for? Call 01777 839176 or use our contact form
