Sequence 750 Large O Ring
This is a genuine replacement Sequence 750 Large O Ring
Like all pond pumps, these high quality Sequence pumps require maintenance from time to time.
-
Sequence 18000S Pump£635.00 -
Sequence 8000S Pump£575.00 -
Sequence 10000S Pump£585.00 -
Sequence 17000S Pump£625.00 -
Sequence Strainer Basket Heavy Duty£575.00 -
Sequence 15000S Pump£615.00 -
Sequence Strainer Basket 2 inch£165.00 -
Sequence Strainer Basket 1.5 inch£165.00 -
Sequence 25000S Pump£645.00 -
Sequence 12000S Pump£595.00
This is a genuine replacement Sequence 750 Large O Ring
Like all pond pumps, these high quality Sequence pumps require maintenance from time to time.
The Sequence 750 Large O Ring will fit the below pumps.
- Sequence 750
- Sequence 8000
- Sequence 10000
- Sequence 12000
To maximize the life of your seal, carefully follow the instructions below.
Caution: Do not compress the graphite head part of the seal prior to its installation, as this may scratch the seal surface and cause seal failure.
- Disassemble pump according to manufacture's prescribed procedure. Remove bracket from motor rear and carefully press out the old seal from the rear of the bracket. Do not pry it our from the shaft!
- Clean all parts (motor shaft, pump parts, o-rings, etc.)
- Make sure you keep all seal faces clean.
- Apply GASGASINCH, (a non-hardening gasket sealer), or Silicon within the pump bracket bore and lightly around the seal canister body. Do not get GASGASINCH or Silicon on the seal head.
- Lightly press the new seal into the pump bracket bore until evenly compressed between the case collar and the pump bracket. Caution: Apply the pressure on the seal case collar only, never to the graphite head. Also, be careful to not touch or damage the graphite face.
- Insert the ceramic into the impeller so that the unmarked surface will contact the graphite head. Note: A thin layer of suitable lubricant around the rubber boot will ease installation. Note: Glycerin works well (Never use oil or grease on EPDM).
- Assemble pump (refer to installation and repair manual).
- Prime the pump and test for proper operation. Never start or run the pump when dry!
- A short running period may be necessary to properly seat the sealing surfaces.
| Pump Type | Spare Parts |
|---|
Standard Delivery Monday to Friday, via DPD or APC
You will receive from our courier tracking details once your item has been despatched, please ensure you check your email / mobile number to monitor your parcel in transit.
Delivery costs for standard items in the UK - £5.95
(Surcharges do apply to remote postcodes)
Heavy items - £9.95
Pipe - £14.95
Larger items:
Palletised items - Some large oversize products, typically items weighing more than 30kg, may require delivery via pallet. Standard Pallet charge is approx. £50.00. To ensure there are no delays with delivery, please include a contact number when placing the order.
Overseas – DHL and UPS, cost based on weight / volume at checkout.
Damages
Although we check that items we send are in good condition before despatched and are packed well to prevent damage, it is sometimes inevitable that the occasional item will get broken in transit.
Should this happen, please let us know within 24 hours of receiving your parcel. We will ask you to email us providing some images of the damage so we can address this with the courier.
We will arrange for a replacement to be sent out to you as quickly as possible, free of charge.
Below is a list of documents that you may find useful.
Can’t find what you’re looking for? Call 01777 839176 or use our contact form
