RO-800 GPD Reverse Osmosis System Pumped
Our RO-800 water filter system is a professional RO system that helps to reduce harmful contaminants that find their way into the water supply, directly affecting private wells and municipal water systems. It is ideal for a koi pond installation and provides a continuous supply of clean, filtered water that is suitable for koi ponds of all sizes.
RO-800 GPD reverse osmosis system pumped water system with auto flushing membrane.
1 x 800GPD extra high capacity membrane 3113 and using only 36vdc Power.
Comes with 3 x 10 inch pre filters, 1 x 800gpd reverse osmosis membrane, auto flush computer with 2 probe TDA meter.
Simple construction and compact size, quickly installed and connected to a water supply. Ideal solution for those who need a lot of clean water for a koi pond or Quarantine system. All you need to do is to connect the RO system to a water supply.
RO-800 GPD Reverse Osmosis System Pumped Specifications:
- Supplied water temperature: 5 - 40 ° C
- Min. Water pressure: 20 psi
- Max. water pressure: 80 psi
- Max. the salinity of water: 2000 ppm (up to 5000ppm on request)
- Connection for 3/8" quick connect or 1/2" 3/4 '' BSP
- Clean water supply hose: 3 / 8 ''
- Drain to the sewer: 1/4 ''
- Dimensions: Height 59 cm, Width 47 cm, Depth 31 cm
RO-800 GPD Reverse Osmosis System PumpedFiltration Filters
- 10-inch 5-micron PP filter
- 10-inch carbon block CTO filter
- 10-inch 1-micron PP filter
- 1 x 800 GPD RO membrane
- Active carbon post filter
- PUMP: 36V 2.8A (not continuous duty)
- VOLTAGE: 240vac transformer to 36Vdc 2.8A
- TRANSFORMER: 240vac transformer to 36Vdc 2.8A
- SOLENOIDS: Solenoid valve 36V 3/8'' TUBE – 3/8''' TUBE
- COMPUTER BOARD: PREMIUM 36V-2TDS
- TDS CONTROL: INLET — OUTLET
Reverse osmosis is a method of purifying water by pushing it through a semi-permeable membrane, the membrane allows pure water molecules through it, whilst impurities are flushed away. By using reverse osmosis, it is possible to remove all suspended solids, up to 98% of dissolved solids and virtually all bacteria, pesticides and viruses. Reverse osmosis has many benefits.
At the heart of any reverse osmosis system is the membrane, water is forced under pressure through the membrane to a storage tank and the waste by-product goes to drain. In addition to the membrane reverse osmosis unit also incorporates pre-filters.
This RO system will remove up to 99% of tap water contaminants.
Typical removal rates (%)
Sodium (99%), Calcium (99%), Magnesium (99%), Potassium (98%), Iron (99%), Manganese (99%), Aluminium (99%), Ammonium (97%), Copper (99%), Nickel (99%), Zinc (99%), Cadmium (99%), Silver (98%), Mercury (98%), Barium (99%), Chromium (99%), Lead (99%), Chloride (99%), Bicarbonate (98%), Nitrate (97%), Fluoride (98%), Silicate (98%), Phosphate (99%), Chromate (99%), Cyanide (95%), Sulphate (99%), Bromide (98%), Arsenic (99%), Selenium (99%), Bacteria (99%), Protozoa (99%), Amoebic Cysts (99%), Giardia (99%), Asbestos (99%), Oestrogen (99%), Sediment / Turbidity (99%)
Important information to consider prior to ordering.
Our Reverse Osmosis Systems are shipped fully assembled complete with a comprehensive instruction manual for easy DIY installation with no plumbing experience required.
The effectiveness and productivity of RO systems increase with greater water pressure and temperature. The actual flow rate (in GPD) of any reverse osmosis system depends on your source water pressure and temperature.
While manufacturers state that 60 psi is required at the membrane for full production, we know that not everyone's cold water is at 60 psi and 30 °C therefore, we remind you that you might get less than the stated GPD from your membrane, perhaps 50% or even less if your pressure and temperature are very low!
If the flow rate is critical for you, you need to consider all these factors before choosing membrane size.
Recommended specification
- Temperature: membranes are designed to operate between 13 °C - 30 °C
- Water pressure: Min 40 psi, Optimum 80 psi,
- Chlorine content of no more than 0.1 ppm
- PH 2 - 11
Please note: This Reverse Osmosis system is fitted with an intermittent use pump and not continuous duty pump, and manufactured for domestic use only.
RO-800 GPD reverse osmosis system pumped water system with auto flushing membrane.
1 x 800GPD extra high capacity membrane 3113 and using only 36vdc Power. Comes with 3 x 10 inch pre filters, 1 x 800gpd reverse osmosis membrane, auto flush computer with 2 probe TDA meter.
Simple construction and compact size, quickly installed and connected to a water supply. Ideal solution for those who need a lot of clean water for a koi pond or Quarantine system. All you need to do is to connect the RO system to a water supply.
RO-800 GPD Reverse Osmosis System Pumped Specifications:
- Supplied water temperature: 5 - 40 ° C
- Min. Water pressure: 20 psi
- Max. water pressure: 80 psi
- Max. the salinity of water: 2000 ppm (up to 5000ppm on request)
- Connection for 3/8" quick connect or 1/2" 3/4 '' BSP
Clean water supply hose: 3 / 8 '' - Drain to the sewer: 1/4 ''
- Dimensions: Height 59 cm, Width 47 cm, Depth 31 cm
RO-800 GPD Reverse Osmosis System PumpedFiltration Filters
- 10-inch 5-micron PP filter
- 10-inch carbon block CTO filter
- 10-inch 1-micron PP filter
- 1 x 800 GPD RO membrane
- Active carbon post filter
- PUMP: 36V 2.8A (not continuous duty)
- VOLTAGE: 240vac transformer to 36Vdc 2.8A
- TRANSFORMER: 240vac transformer to 36Vdc 2.8A
- SOLENOIDS: Solenoid valve 36V 3/8'' TUBE – 3/8''' TUBE
- COMPUTER BOARD: PREMIUM 36V-2TDS
- TDS CONTROL: INLET — OUTLET
Reverse osmosis is a method of purifying water by pushing it through a semi-permeable membrane, the membrane allows pure water molecules through it, whilst impurities are flushed away. By using reverse osmosis, it is possible to remove all suspended solids, up to 98% of dissolved solids and virtually all bacteria, pesticides and viruses. Reverse osmosis has many benefits.
At the heart of any reverse osmosis system is the membrane, water is forced under pressure through the membrane to a storage tank and the waste by-product goes to drain. In addition to the membrane reverse osmosis unit also incorporates pre-filters.
At the heart of any reverse osmosis system is the membrane, water is forced under pressure through the membrane to a storage tank and the waste by-product goes to drain. In addition to the membrane reverse osmosis unit also incorporates pre-filters. Because filtered RO water is produced very slowly it is necessary to store the treated water in a tank or container to supply filtered RO water as and when it is required.
This RO system will remove up to 99% of tap water contaminants.
Typical removal rates (%)
Sodium (99%), Calcium (99%), Magnesium (99%), Potassium (98%), Iron (99%), Manganese (99%), Aluminium (99%), Ammonium (97%), Copper (99%), Nickel (99%), Zinc (99%), Cadmium (99%), Silver (98%), Mercury (98%), Barium (99%), Chromium (99%), Lead (99%), Chloride (99%), Bicarbonate (98%), Nitrate (97%), Fluoride (98%), Silicate (98%), Phosphate (99%), Chromate (99%), Cyanide (95%), Sulphate (99%), Bromide (98%), Arsenic (99%), Selenium (99%), Bacteria (99%), Protozoa (99%), Amoebic Cysts (99%), Giardia (99%), Asbestos (99%), Oestrogen (99%), Sediment / Turbidity (99%)
Important information to consider prior to ordering.
Our Reverse Osmosis Systems are shipped fully assembled complete with a comprehensive instruction manual for easy DIY installation with no plumbing experience required.
The effectiveness and productivity of RO systems increase with greater water pressure and temperature. The actual flow rate (in GPD) of any reverse osmosis system depends on your source water pressure and temperature.
While manufacturers state that 60 psi is required at the membrane for full production, we know that not everyone's cold water is at 60 psi and 30 °C therefore, we remind you that you might get less than the stated GPD from your membrane, perhaps 50% or even less if your pressure and temperature are very low!
If the flow rate is critical for you, you need to consider all these factors before choosing membrane size.
Recommended specification
Temperature: membranes are designed to operate between 13 °C - 30 °C
Water pressure: Min 40 psi, Optimum 80 psi, Chlorine content of no more than 0.1 ppm
Standard Delivery Monday to Friday, via DPD or APC
You will receive from our courier tracking details once your item has been despatched, please ensure you check your email / mobile number to monitor your parcel in transit.
Delivery costs for standard items in the UK - £5.95
(Surcharges do apply to remote postcodes)
Heavy items - £9.95
Pipe - £14.95
Larger items:
Palletised items - Some large oversize products, typically items weighing more than 30kg, may require delivery via pallet. Standard Pallet charge is approx. £50.00. To ensure there are no delays with delivery, please include a contact number when placing the order.
Overseas – DHL and UPS, cost based on weight / volume at checkout.
Damages
Although we check that items we send are in good condition before despatched and are packed well to prevent damage, it is sometimes inevitable that the occasional item will get broken in transit.
Should this happen, please let us know within 24 hours of receiving your parcel. We will ask you to email us providing some images of the damage so we can address this with the courier.
We will arrange for a replacement to be sent out to you as quickly as possible, free of charge.
