Durapipe One Step PVC U Solvent Cement 500 ml
Durapipe One Step PVC U Solvent Cement 500 ml is suitable for use on PVC Pressure systems, may also be used on PVC and ABS.
-
Solvent Weld Glue Wet R Dry Fast CureStarting at £15.95
Durapipe One Step PVC U Solvent Cement 500 ml is suitable for use on PVC Pressure systems, may also be used on PVC and ABS.
The solvent cement operates by chemically softening the outside of the pipe and the inside of the fitting. Joint integrity is greatly reduced if these surfaces are not absolutely clean and properly prepared.
• Cut pipe square, remove all burrs, dirt, grease and moisture. Clean surfaces with plastic pipe cleaner below.
• IMPORTANT: Check dry fit. A tight interference fit is essential if quick pressurisation is required.
• Working quickly, apply a full, even coat of cement to pipe, then a thin, even coat to inside of fitting.
• Avoid excessive use of cement resulting in puddling.
• While cement is wet, immediately push pipe and fitting together.
• Hold joint for at least 30 seconds to avoid pushout.
• Allow a few minutes before applying pressure.
• For temperatures below 5°C. allow a longer cure time.
Drying Times
The drying times will vary with fit, amount of solvent cement applied, ambient temperature and working pressure. It is recommended that, wherever possible, joints of sizes up to 225mm are allowed to dry for at least 24 hours and sizes 250mm and 315mm for at least 48 hours. These guidelines are based on an ambient temperature of between 10°C to 40°C. Longer drying times will be required at lower and higher ambient temperatures.
Replace lid after use, store between 5°C and 20°C.
Standard Delivery Monday to Friday, via DPD or APC
You will receive from our courier tracking details once your item has been despatched, please ensure you check your email / mobile number to monitor your parcel in transit.
Delivery costs for standard items in the UK - £5.95
(Surcharges do apply to remote postcodes)
Heavy items - £9.95
Pipe - £14.95
Larger items:
Palletised items - Some large oversize products, typically items weighing more than 30kg, may require delivery via pallet. Standard Pallet charge is approx. £50.00. To ensure there are no delays with delivery, please include a contact number when placing the order.
Overseas – DHL and UPS, cost based on weight / volume at checkout.
Damages
Although we check that items we send are in good condition before despatched and are packed well to prevent damage, it is sometimes inevitable that the occasional item will get broken in transit.
Should this happen, please let us know within 24 hours of receiving your parcel. We will ask you to email us providing some images of the damage so we can address this with the courier.
We will arrange for a replacement to be sent out to you as quickly as possible, free of charge.
