Suppliers of High Quality Japanese Koi and Products

Tel: 01777 839 176

Water Purifier and Fittings

Purity on Tap is, today, the largest independent UK manufacturer of aquatic purification equipment.

In their Koi water gardening & Coldwater range they have a tremendous selection of purifiers to suit even the most demanding pond keepers needs.

The very water we drink, is not fit for Koi by any means.

Mains water contains Chlorine and many hard metals, that just simply are not healthy, or productive for a healthy and balanced nitrogen cycle. The water purifiers we offer are suited to the task of protecting our Koi from the harmful elements within our public water systems. They are, naturally, not intended for use as drinking water purifiers for human consumption.
To have effective water purification it is best to allow for very slow flow rates. The longer the water takes to pass through the purifier, the greater the benefits of the purification system. A flow rate of one to two gallons per minute should adequately remove any nasty impurities, and the water can safely be added directly into your filtration system or the pond.

The “CHLORNOMORE”
Chloramine is a very stable, hard-to-remove disinfectant and highly toxic to aquatic species which is now increasingly used by water utilities in public supplies throughout the UK.

Koi-keepers need to take great care to ensure that none of this compound reaches the pond as it can destroy the filter balance and seriously damage fish health.

Various media have been promoted to deal with Chloramine but all have suffered from limited effectiveness over any length of “life”.

Purity on Tap are therefore now happy to be able to offer the koi-keeper the new super-effective “CHLORNOMORE” cartridge.

This specially manipulated activated carbon, never before seen on the aquatic purification market, can out-perform a good activated carbon by anything up to ten times* for removal of this contaminant.

By substituting this for one of our “Short Travel” carbons, a hitherto standard cartridge replacement set for the KP, Protex and Metalex ranges can be upgraded to this much higher performance for only an extra £12.50.

It can also be used to upgrade all other makes using the standard 10” housings to an effective performance.

Our complete line of » Water Purifier and Fittings

Water Purifier Housing

Water Purifier Housing

These 10 inch filter housings offer the versatility to meet all of your large-capacity filteration needs, including high-flow and... (click on image for more details)
Water Purifier Housing Bracket

Water Purifier Housing Bracket

Filter Housing Bracket for mounting your filter housing to wall or joist. Always use a bracket to eliminate unnecessary weight on your water... (click on image for more details)
Water Purifier Housing Spanner

Water Purifier Housing Spanner

Use the Filter Housing Spanner for twisting off the canister or sump on many water filter housings. Overtightening the sump can cause damage... (click on image for more details)
Water Purifier Housing Connector

Water Purifier Housing Connector

These 3/4 inch Male Thread x 3/4 inch Male Thread connectors will enable you to add another Water Purifier Housing or even three if you like.... (click on image for more details)
1 inch Male Thread x 3/4 inch Male Thread

1 inch Male Thread x 3/4 inch Male Thread

These 1 inch Male Thread x 3/4 inch Male Thread connectors will enable you to connect to water meter or other device, they also allow you to... (click on image for more details)
1/2 inch Hose Connector x Female Click

1/2 inch Hose Connector x Female Click

The 1/2 inch Hose Connector x Female Click will enable you to connect your hose pipe to to your Water Purifier, all you will need is a Male... (click on image for more details)
Female Thread x Male Click

Female Thread x Male Click

These Female Thread x Male Click fittings can be screwed on to Taps, Filter Housing to get you on to Hose, they are also used with the 1/2... (click on image for more details)
Male Thread x Male Click

Male Thread x Male Click

These Male Thread x Male Click fittings can be screwed in to your Filter Housing to get you on to Hose, they are also used with the 1/2 inch... (click on image for more details)
1.5 inch Male Thread x 1 1/4 inch Male Thread

1.5 inch Male Thread x 1 1/4 inch Male Thread

These 10 inch filter housings offer the versatility to meet all of your large-capacity filteration needs, including high-flow and... (click on image for more details)
Water Purifier Cartridge

Water Purifier Cartridge

Chloramine is a very stable, hard-to-remove disinfectant and highly toxic to aquatic species which is now increasingly used by water utilities... (click on image for more details)
We accept these forms of payment