G4 Pond Sealer
G4 Pond Seal is a moisture cured polyurethane which forms a non-porous seal on concrete rendered ponds, G4 uses the moisture in the air and the render to harden, it can be applied to slightly damp surfaces, but it is important that the render is sufficiently dry to be porous so as to enable the first coat of G4 to bond and obtain a mechanical grip,G4 can be applied in poor weather conditions, high humidity and at temperatures down to zero degree's.
As a general rule the pond should be constructed to be structurally sound since the G4 only provides the waterproof seal, on no account use a P.V.A based sealer to seal or prime any surfaces, these materials can contain ammonia and also stop the G4 from adhering to the render.
Ponds will normally be constructed with either brick, lightweight block or concrete block and then rendered, it is not necessary to add waterproofing agents to the render mix as this will increase the density of the render and can inhibit penetration, if a waterproofing agent has been used, simply rub down the surface with an abrasive to obtain a key.
If a fibre is used to give strength to the render it is necessary to burn off or sand down any fibres that are on the surface, as any fibres that protrude will cause leakage, G4 will not bond to the fibres.
The cement render should be trowelled to an even surface but not to a smooth dense plaster like finish since this prevents the penetration of G4, new render should be kept damp for the first three days and then allowed to harden for 21-28 days depending on conditions.
Method of application
Apply the first coat by brush, a roller can be used but it is necessary to avoid puddling of the G4 on the base, it is best to use a brush, allow the first coat to become finger tacky ( like cellotape ) or dry enough to walk upon carefully, approximately 45-60 minutes depending on humidity, then apply 2nd coat, when second coat is finger tacky apply third coat, no longer than 4 hours should pass between coats, if a colour is used, then use 2 coats of standard and 2 coats of colour, G4 is mechanically hard after 24 hours but must be given 72 hours to chemically cure, after which the pond can be washed down with plenty of water, drained, and can then be filled.
G4 Clear - 3 coats = 550g per sqm for the three coats
G4 Coloured - 2 coats of standard = 410g per sqm for 2 coats
and 2 coats of colour = 400g per sqm for 2 coats
G4 is available in Clear, Green and Black.
G4 Pond Sealer Clear 1 kg
G4 Pond Sealer Clear 2.5 kg
G4 Pond Sealer Clear 5 kg
G4 Pond Sealer Clear 25 kg
G4 Pond Sealer Black 1 kg
G4 Pond Sealer Black 2.5 kg
G4 Pond Sealer Black 5 kg
G4 Pond Sealer Black 25 kg
G4 Pond Sealer Green 1 kg
G4 Pond Sealer Green 2.5 kg
G4 Pond Sealer Green 5 kg
G4 Pond Sealer Green 25 kg
See More Silicone and Sealers
Gold label Underwater Sealer does exactly what the name says, Gold label Underwater Sealer is remarkable and it will seal everything and everything, stainless steel to stainless steel, it will stick steel to... (click on image for more details)
New to the aquatics market Gold Label Aqua Pond Paint is a product designed to make the waterproofing of concrete ponds as simple as painting a wall with emulsion!Gold label Aqua Pond Paint is water based with an... (click on image for more details)
Silver Label Aquarium Silicone (clear)
Specially formulated for Fish Tank Construction / Repair
Easy To Use
Silver Label Aquarium Silicone is available in two... (click on image for more details)
No longer need you worry about sealing that Pond liner and installing a Bottom Drain use Silver label Silicone Sealer and it will never leak.
For best results clean all surfaces to be free of grease, algae, etc.... (click on image for more details)
Gold Label Cleaning Solvent
Gold Label Cleaning Solvent removes excess sealer from tools etc
Fast & effective
Removes excess sealer
Complete with Safety Cap
We have all got to much excess... (click on image for more details)
Gold Label Gloves - Full Arm length
Gold Label Full Arm length Gloves will give you the protection you need for those messy cleaning jobs, made from touch sensitive hypoallergenic vinyl, so ideal for those... (click on image for more details)
Gold Label Pipe Repair Tape
Easy to Use
Instructions for Gold Label Pipe Repair Tape
Turn off water pressure in pipe before commencing repair
Clean... (click on image for more details)
Gold Label Pond Liner Patch
Need to seal a leak on your pond liner, look no further!Instructions for Gold Label Liner PatchClean area to be repairedCut patch to over sizeShape patch to circle or oval shapeUsing... (click on image for more details)
Polyflex is a one part moisture curing polyurethane sealer which stays elastic when dry and is ideal for use to seal surfaces permanently exposed to water.
It is therefore ideal for sealing round pipe joints and... (click on image for more details)
The easy to use cement additive that makes your pond smoother, stronger and crack-resistant.
Building a concrete pond has never been so easy.
Wizard Fibre has been in use for decades in specialised... (click on image for more details)
Rein Fibres 1 Kg - 6 mm StrandsThese polypropylene fibres have been used in cement renders for over twenty five years, they are mixed into the render and the random alignment of the fibres increases its tensile... (click on image for more details)
Skeleton guns for 310ml and 380ml cartridges. High Powered Gun which is easier on the hands for the regular user, ideal for sealing round pipe joints and flanged fittings such as bottom drains in liner ponds.... (click on image for more details)
PTFE Thread Sealing Tape
A standard grade thread seal tape of nominal thickness 0.075mm and density 0.4-0.5 g/cc, manufactured from 100% pure, virgin P.T.F.E. and containing less than 0.1% residual lubricant.... (click on image for more details)